• Computer design of a steel substructure and cut model according to customer supplied data
  • Steel substructure
  • Plug under construction
  • Glass fibre laminate is applicated on a layer of plywood
  • Hand-laid laminate covers the balsa core
  • Pasting
  • Fine cutting the paste giving it a smooth surface
  • Computer design of a rotor blade model and steel substructure according to customer supplied data
  • Steel substructures are used in master plug construction for a stiff and durable base
  • Wooden frames are attached to the uprights of the steel substructures giving the plug its shape
  • Glass fibre laminate is applied on a layer of plywood
  • Hand-laid laminate covers the balsa core
  • High quality EP paste is applied on a laminate layer made of E-glass and epoxy resin
  • Fine cutting the paste giving it a smooth surface


Information according to Germany's Telemediengesetz (Telecommunications service laws) § 5


Website operator: Knierim Tooling GmbH



Knierim Tooling GmbH
Uferstraße 100

24106 Kiel


Telephone +49 431 30 10 666
Fax +49 431 30 10 669
E-mail This email address is being protected from spambots. You need JavaScript enabled to view it.


Managing directors Gunnar Knierim and Steffen Müller
Judiciary court Kiel
Commercial registration number HRB 9420 KI
VAT number. DE 814 966 637


Legal disclaimer

The contents of this website are copyrighted. All rights reserved. No use of this information is permitted without the prior written consent of Knierim Tooling GmbH. We will continue to make every effort to provide accurate and up-to-date information. However, we make no warranty or representation, expressed or implied, that the information contained or referenced herein is accurate or complete. Furthermore, Knierim Tooling GmbH shall not be liable in any manner whatsoever for direct, indirect, incidental, consequential, or punitive damage resulting from the use of, access of, or inability to use this information. Knierim Tooling GmbH shall not be liable in any way for possible errors or omissions in the contents hereof. This website has been designed to provide general information about Knierim Tooling GmbH and as such should only be treated as a guide. For specific information, advice, recommendations and explanations please contact us directly. This site also contains third-party information and links to other internet sites. Knierim Tooling GmbH does not assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product or process disclosed on the website or other material accessible from the website.

Knierim Tooling GmbH reserves the right to alter the content of this website in any way, at any time, for any reason, without prior notification, and will not be liable in any way for possible consequences of such changes. This information is publicised for Germany and is based on German laws. Any access to our information from locations outside of this region is not intended. Knierim Tooling GmbH assumes no liability for the use, the suitability, or the legality of this information in countries outside of Germany.


Privacy Statement


This website is run by Knierim Tooling GmbH. When using our services, you may be requested to provide personal information. Answering these questions is voluntary. We regard your privacy as important and comply with the German Privacy Act.


Status: October 2012